EMCO 10” X 24” MODEL MAXIMAT V10-P TOOLROOM LATHE/Mill S/N C47608085Z, 2500 RPM SPINDLE, 3-JAW CHUCK
EMCO 10” X 24” MODEL MAXIMAT V10-P TOOLROOM LATHE/Mill S/N C47608085Z, 2500 RPM SPINDLE, 3-JAW CHUCK
$3,495 (USD)
Location:Simpsonville, KY
Description
EMCO 10” X 24” MODEL MAXIMAT V10-P TOOLROOM LATHE/MILL S/N C47608085Z, 2500 RPM SPINDLE, 3-JAW CHUCK V10P factory fitted Norton-type quick-change screwcutting gearbox able to generate 24 pitches from 0.125 to 4.00 mm. English-pitches from 4 to 120 t.p.i power cross feed and 4-speed milling head Technical Data Motor rating Main drive motor single phase, 1,400/2,800 RPM; 0.6/0.85 HP Headstock Spindle nose Form E- M39 DIN 800 with Morse taper No. 3 Feeds 24- longitudinal feeds from 0.028-0.444 mm/turn 24- cross feeds from 0.014-0.222 mm/turn Thread pitches 24 metric threads from 0.25-4.00mm Whitworth threads from 120-6 threads/inch Module threads from M 0.15-M 2.00 Tailstock Morse taper No. 2 Set-over 12.5 mm on each side of axis Manual file:///C:/Users/Johnk/Downloads/Maximat-V10P-Instruction-Manual-RED.pdfEMCO 10” X 24” MODEL MAXIMAT V10-P TOOLROOM LATHE/MILL S/N C47608085Z, 2500 RPM SPINDLE, 3-JAW CHUCK V10P factory fitted Norton-type quick-change screwcutting gearbox able to generate 24 pitches from 0.125 to 4.00 mm. English-pitches from 4 to 120 t.p.i power cross feed and 4-speed milling head Technical Data Motor rating Main drive motor single phase, 1,400/2,800 RPM; 0.6/0.85 HP Distance between centers 25.59" (650mm) Centre height 5" (127mm) Swing over cross slide 5.7" (145mm) Required floor space 50.39" x 21.65" (1,280mm x 550mm) Net weight 415 lbs. (188kg) Headstock Spindle nose Form E- M39 DIN 800 with Morse taper No. 3 Hole through spindle .787 inches (20 mm) Taper socket for collets L20 40 - 826 Spindle bearing arrangement 2 precision taper roler bearings Spindle speeds 60-120-240-315-480-630-1250-2500 rpm Feeds 24- longitudinal feeds from 0.028-0.444 mm/turn 24- cross feeds from 0.014-0.222 mm/turn Thread pitches 24 metric threads from 0.25-4.00mm Whitworth threads from 120-6 threads/inch Module threads from M 0.15-M 2.00 Tailstock Barrel diameter: 30 mm Set-over 12.5 mm on each side of axis Manual file:///C:/Users/Johnk/Downloads/Maximat-V10P-Instruction-Manual-RED.pdf
Specifications
Condition | Used |
Distance between centers | 25.59" (650mm) |
Centre height | 5" (127mm) |
Swing over cross slide | 5.7" (145mm) |
Required floor space | 50.39" x 21.65" (1,280mm x 550mm) |
Net weight | 415 lbs. (188kg) |
Hole through spindle | .787 inches (20 mm) |
Taper socket for collets | L20 40 - 826 |
Spindle bearing arrangement | 2 precision taper roler bearings |
Spindle speeds | 60-120-240-315-480-630-1250-2500 rpm |
Barrel diameter | 30 mm |
Traverse of barre | l 80 mm |
Traverse of barrel | 80 mm |
Morse taper | No. 2 |