SOUTHWESTERN INDUSTRIES TRAK DPM 2 Bed Mill W/ PROTOTRAK EMX3 CONTROL

SOUTHWESTERN INDUSTRIES TRAK DPM 2 W/ PROTOTRAK EMX3 CONTROL

Specifications

ProtoTRAK CNC

Table Size 49″ x 9″50″

T-Slots (Number x Width)3 x .63″ x 2.5″3

Travel (X, Y, Z Axis)*31″ x 16″ x 22″ Note

Quill Diameter 3 3/8″

Maximum Quill Travel 5″

Spindle Taper R8

Spindle Speed Range RPM 40 - 600/ 300-5,000

Spindle Center to Column Face 18.5″

Head Swivel (side to side)+/- 90°+/-

Quill Feeds per Revolution of Spindle 0.0015/0.003/0.006″

Spindle Motor HP3

HPPower Requirements 200-240V, 3P, 27A

Maximum Weight of Workpiece 1320 lbs

Height Of Table From Bottom Of Bed 36.75″

Max Spindle Nose To Table 25.5″

Min Height 86.625″

Max Height 98.75″

Width Of Machine Including Table 71.25″

Overall Length With Electric Door Closed 73.31″

Overall Length With Electrical Door Open 93.88″

Overall Width Inc Full Table Traverse 102.53″

Footprint Of Machine23.13″ x 40.5″

Weight Net / Shipping Lbs. 3200 / 3500

Rapid Traverse X, Y, ZMechanical Handwheels: 250 IPM on X, Y and Z

Electronic Handwheels: 400 IPM on X and Y, 250 IPM on Z

Mechanical Handwheels: 250 IPM on X, Y and Z

Electronic Handwheels: 400 IPM on X and Y, 250 IPM on Z400 IPM

Coolant Reservoir Capacity 10 gallons

Drilling Max Capacity (diameter) 1″ dia

Milling Max Capacity 3 inch³/min

Tapping Max Capacity ¾ - 10

* DPM EMX2- If you remove the way covers you can gain approximately 2″ of additional travel at the top. Values in the specifications table are with the way covers installed.

Options;

Halogen Work Light

Flip Down Work Shield

Remote Stop Function

Right Angle Plate

Vise pictured is not included.

Learning the ProtoTRAK®

Even if your people have never used a CNC before, they will be able to learn the ProtoTRAK in just a few hours. From the first day you own it, your people will discover that it is easier to make parts with a ProtoTRAK than it is to use manual machining methods. They’ll quickly find, like thousands of machinists before them, that the effort to learn the ProtoTRAK will pay off in job satisfaction.

Easy to Learn and Use Conversational Language

Program the ProtoTRAK EMX by making simple selections and answering prompts in plain English. Unlike conventional CNCs, you define only the part geometry; the ProtoTRAK EMX defines the tool path for you.

Canned Cycles

• Posn/ Drill
• Bolt Hole
• Mill
• Arc
• Pocket
• Frame
• Rotate
• Repeat

Software Features — General Operation

• Clear, uncluttered screen display
• Flyout windows for instant access to features and information
• Enhanced ProtoTRAK Assistance
• Programming Defaults to simplify part programming
• Event Options to modify Defaults or select additional functionality
• QWERTY touchscreen keyboard
• Calculator
• Prompted data inputs
• English language — no codes
• Soft keys — change with context
• Windows® operating system
• Selectable two or three-axis CNC
• Color graphics with adjustable view
• Gestures for pan, zoom and rotate
• Inch/mm conversion
• Convenient modes of operation
• Networking

Program Mode Features

• Circular interpolation
• Linear interpolation
• Advanced Adaptive Tool Path (O)
• Geometry programming
• Toolpath programming
• Auto Geometry Engine® — Built-in CAD to fill in missing print data
• Alphanumeric program names
• Automatic scaling of print data
• Nesting
• Multiple fixtures (O)
• Incremental and absolute dimensions may even be mixed on a single point
• Automatic diameter cutter comp
• Program data editing
• Part graphics update while programming
• Selectable display between size of drawing and number of events
• List Step graphics relate Events to Drawing
• Editing of programmed data
• Swipe to move through programmed Events

DRO Mode Features

• Incremental and Absolute dimensions
• Graphical Override of Axis Feed and Spindle RPM
• Jog at rapid with override
• Power feed X, Y or Z
• Teach-in of manual moves
• Programmable Go To dimensions (0)
• Servo return to 0 absolute
• Tool offsets from Tool Library
• Line Center calculation
• Circle Center calculation

Canned Cycles (Event Types):

• Position
• Drill / Bore / Tap
• Bolt Hole Drill / Bore / Tap
• Mill
• Arc
• Circular Profile
• Rectangular Profile
• Irregular Profile (with Auto Geometry Engine)
• Face Mill (O)
• Circle Pocket
• Rectangular Pocket
• Irregular Pocket (with Auto Geometry Engine)
• Pockets with Circular, Rectangular and Irregular Islands
• Subroutine Repeat
• Subroutine Mirror
• Subroutine Rotation
• Subroutine Convert Drill to Tap
• Copy (O)
• Copy Mirror (O)
• Copy Rotate (O)
• Copy Convert Drill to Tap (O)
• Helix
• Engrave (O)
• Engrave subroutines and Copy (O)
• Thread Mill (O)
• Program Pause

Auxiliary Functions Option

Enables programming and control of:

• Coolant
• Air (for Fog Buster® or other air-driven coolant systems)
• Pulse Indexer
• Programable Output signal

Advanced Features Option

• Adaptive Pocket Roughing
• Verify Make Part – solid model graphics of programmed toolpath
• Finish Tool #
• Rest Machining
• Multiple Fixture Offsets
• Event Comments
• G-code editor
• Thread Mill event
• Engrave Event
• Sub and Copy – Rotate and Mirror of Engrave Events
• Copy
• Copy Mirror
• Copy Rotate
• Copy Convert Drill to Tap
• Tool Library
• Chip Clear
• Clipboard

Offline Programming Option

• ProtoTRAK RMX user interface for Windows PC
• Program parts and simulate CNC Run
• Modify files from current and former ProtoTRAK models

Parasolid File Converter Option

• Import and convert 3D CAD data into ProtoTRAK programs
• X_T files
• X, Y & Z dimensions are transferred into program events
• 2D and 3D views of part
• Add or remove geometry
• Chaining
• Easy, prompted process you can do right at the machine

DXF File Converter Option

• Import and convert CAD data into ProtoTRAK programs
• DXF or DWG files
• Chaining
• Automatic Gap Closing
• Layer control
• Easy, prompted process you can do right at the machine

Clear Off Option

Clear Off allows for the removal of part material from the outside in, leaving only the bosses and profiles you want. This option is easily programmed at the machine, and works with both DXF and Parasolid models.