The Trak DPM SX2 is intended for medium sized work. The machine's X, Y, Z limits are 32" x 16" x 27" (812.8mm x 406.4mm x 685.8mm) and the table size is 49" x 9" (1244.6mm x 228.6mm). The machine has a spindle speed range of 300 to 5000 RPM with a maximum feed rate of 90 IPM (2286 mm/m) in the X,Y & Z axis.

Machine Specifications

·         Table Size – 49” x 9”

·         T-Slots (number x width x pitch) - 3 x .63” x 2.5”

·         Travel (X, Y, Z axis) - 32 x 16 x 27

·         Quill Diameter - 3 3/8”

·         Maximum Quill Travel - 5”

·         Spindle Taper - R8

·         Spindle Speed Range - 40-600, 300-5000

·         Spindle Center to Column Face - 18”

·         Spindle Motor Power – 3 HP

·         Power requirements, control - 110V; 1P; 10A

·         Power requirements - 220V;3P; 11A

·         Maximum Weight of Workpiece - 1320 lbs.

·         Height of table from bottom of bed - 37”

·         Max spindle nose to table - 27”

·         Min height - 92”

·         Max height - 100”

·         Width of machine including table - 70”

·         Length with electric box door closed – 62.25”

·         Overall width incl full table traverse - 104”

·         Overall length with electrical door open - 72”

·         Footprint of Machine – 23.125” x 43.3”

·         Net weight / shipping lbs.  - 3300 / 3600                             

·         rapid traverse X, Y, Z - 150 IPM                                           

·         Auto Lube Pump

·         Precision ground ballscrews in the table, saddle and ram

·         Chrome hardened and ground quill

·         Meehanite castings

·         Slide ways are Turcite coated

·         Wide way surfaces are hardened and ground

·         Drilling  max capacity - 1”

·         Milling max capacity - 3 inch³/min

·         Tapping max capacity - 3 /4 - 10

Included Machine Options

·         Electronic Handwheels

·         Remote Stop/Go switch

·         Power Drawbar

·         Chip Pan / Splash Shield

·      Table Guard Enclosure

·         Limit Switches

·         Vise 

ProtoTRAK SMX System Specifications

(O) indicates optional feature

ProtoTRAK System Hardware

·         ProtoTRAK SMX CNC

·         Two- or three-axis CNC, 3-axis DRO

·         Real handwheels for manual operation

·         10.4” color active-matrix screen

·         Industrial-grade Pentium® processor

·         1 GB Ram

·         4 USB connectors

·         Override of program feedrate

·         LED status lights built into display

·         RJ45 Port and Ethernet card (O)

·         Override of program spindle speed (O)

·         USB Thumb drive flash memory 512 or more (O)

·         Uncluttered front panel with few hard keys

·         Integrated Ram and Quill encoders resolve to one Z dimension

Software Features – general operation

·         Clear, uncluttered screen display

·         Prompted data inputs

·         English language – no codes

·         Soft keys - change within context

·         Windows® operating system

·         Selectable two or three-axis CNC

·         Color graphics with adjustable views

·         Inch/mm selectable

·         Convenient modes of operation

DRO Mode features

·         Incremental and absolute dimensions

·         Jog at rapid with override

·         Powerfeed X, Y or Z

·         Do One CNC canned cycle

·         Teach-in of manual moves

·         Servo return to 0 absolute

·         Tool offsets from library

·         Go To Dimensions (O)

·         Spindle speed setting with manual override

·         Fine/Course handwheel resolution (O)

Program Mode features

·         Auto Geometry Engine (O)

·         Geometry-based programming

·         3-axis geometry programming (O)

·         Tool Path programming (O)

·         Scaling of print data (O)

·         Multiple fixture offsets (O)

·         Programming of Auxiliary Functions (O)

·         Event Comments (O)

·         Three-axis Geometry conversational programming (O)

·         Incremental and absolute dimensions

·         Automatic diameter cutter comp

·         Circular interpolation

·         Linear interpolation

·         Look –graphics with a single button push

·         List step – graphics with programmed events displayed

·         Alphanumeric program names

·         Program data editing

·         Program pause

·         Conrad – automatic corner radius

·         Programmable spindle speeds

·         Math helps with graphical interface

·         Auto load of math solutions

·         Tool step over adjustable for pocket routines

·         Pocket bottom finish pass

·         Selectable ramp or plunge cutter entry

·         Subroutine repeat of programmed events

·         Nesting

·         Rotate about Z axis for skewing data

·         Mirror of programmed events (O)

·         Copy (O)

·         Copy rotate (O)

·         Copy mirror (O)

Canned cycles

·         Position

·         Drill

·         Bolt Hole

·         Mill

·         Arc

·         Circle pocket

·         Rectangular pocket

·         Irregular Pocket (O)

·         Circular profile

·         Rectangular profile

·         Irregular Profile(O)

·         Circle Island (O)

·         Rectangular Island (O)

·         Irregular Island(O)

·         Helix (O)

·         Thread milling (O)

·         Engrave(O)

·         Tapping(O)

·         Face Mill (O)

Edit mode Features

·         Delete events

·         Erase program

·         Spreadsheet editing (O)

·         Global data change (O)

·         G-Code editor (O)

·         Clipboard to copy events between programs (O)

Set Up Mode Features

·         Program diagnostics

·         Advanced tool library

·         Tool names

·         Tool length offset with modifiers

·         Advanced diagnostic routines

·         Software travel limits

·         Tool path graphics with adjustable views

·         Program run time estimation clock (O)

Run Mode Features

·         TRAKing (O)

·         Trial run at rapid

·         3D CAM file program run

·         3D G code file run with tool comp

·         Real time run graphics with tool icon

·         Countdown clock to next pause or tool change (O)

Program In/Out Mode Features

·         Program storage to USB Flash drive

·         CAM program converter

·         Converter for prior-generation ProtoTRAK programs

·         DXF/DWG file converter (O)

·         Selection of file storage locations (O)

·         Automatic file back-up routine (O)

·         Preview graphics for unopened files (O)

·         Networking (O)

Control Options

Advanced Features with Verify Option

·         Verify – see a 3-D model machined before cutting chips

·         Auto Geometry Engine ™

·         Programmable Auxiliary functions

·         3-axis conversational programming

·         Additional Canned Cycles:

- Irregular Pocket

- Circle Island

- Rectangular Island

- Irregular Island

- Irregular Profile

- Helix

- Thread milling

- Engrave

- Tapping

- Face Mill

·         G-Code editor

·         Countdown clock to next pause or tool change

·         Total program time estimator

·         Spreadsheet editing

·         Global data change

·         Scaling of print data

·         Multiple fixture offsets

·         Event comments

·         Tool path conversational programming

·         Mirror of programmed events

·         Copy with or without offsets

·         Copy Rotate

·         Copy Mirror

·         Clipboard to copy events between programs

Networking Option

·         Networking via RJ 45 port

The DXF File Converter Option

·         Import and convert CAD data into ProtoTRAK programs

·         DXF or DWG files

·         Chaining

·         Automatic Gap Closing

·         Layer control

·         Easy, prompted process you can do right at the machine

CAM Out Converter Option

·         Save ProtoTRAK files as CAM files for running on different controls

TRAKing/Electronic Handwheels Option

·         Electronic Handwheels on X and Y (replaces the mechanical handwheels)

·         TRAKing of programs during program run

·         Go To Dimensions

·         Selectable Fine/Coarse handwheel resolution