MRC 7417 DU, 8.27" OD, 3.35" ID Single Row Cylindrical Bore Angular Contact Ball Bearing (2)
MRC 7417 DU, 8.27" OD, 3.35" ID Single Row Cylindrical Bore Angular Contact Ball Bearing (2)
$995 (USD)
Location:Simpsonville, KY
Description
PRODUCT DETAILS
- Unmounted, Angular Contact Bearing
- 3.35 in Inner Diameter
- 8.27 in Outer Diameter
- 2.05 in Width
- Bearing Steel Material
FEATURES
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7400-PJ and PJD Series bearings are similar to the 7200-PJ and 7300-PH Series but are heavier sectioned and are used for very heavy thrust loads or combined radial and thrust loads where thrust is predominant
SPECIFICATIONS
BALL MATERIAL Steel
FLUSH GROUND Yes
O.D. TYPE Cylindrical
I.D. 3.35 in, 85 mm
RADIAL INTERNAL CLEARANCE Normal
NO. OF BEARINGS 1
CONTACT ANGLE 40 Degree
CAGE MATERIAL Brass
LOCKING DEVICE No Locking Device
INNER RING WIDTH 2.05 in, 52 mm
NO. IN SET Single Bearing
RING TYPE Solid Inner Ring and Solid Outer Ring
PRECISION LEVEL Standard (ABEC 1)
INCH/METRIC Metric
CAGE TYPE Metal
CAGE Machined Metal
TEMPERATURE RANGE [MAX] 450 °F
ICNUMBER 7696682
CAPACITY Standard Capacity
SEAL TYPE Unsealed
OUTER RING WIDTH 2.05 in, 52 mm
SNAP RING No Snap Ring
NO. OF ROWS Single
RADIAL INTERNAL CLEARANCE SPECIFICATION Normal Clearance
SEAL MATERIAL None
BORE TYPE Cylindrical
ROLLING ELEMENT Ball
DUPLEX TYPE Single
FILLET RADIUS 3 mm
INTERNAL DESIGN Universal Mounting
O.D. 8.27 in, 210 mm
SERIES 7400PJ
LUBRICANT Oil Preservative
ENCLOSURE Open
ROW TYPE 1
ORIGIN Single Row Angular Contact
BEARING CLASS Class 6 / P6
ELEMENT MATERIAL Bearing Steel
MATERIAL Bearing Steel
WIDTH 2.05 in, 52 mm
ROWS OF BALLS Single
LIMITING SPEED - OIL 3800 rpm
STATIC LOAD RATING 166 kN
LIMITING SPEED - GREASE 2900 rpm
BEARING TYPE Unmounted, Angular Contact
PRELOAD LEVEL Light
PRECISION RATING ABEC 3
DYNAMIC LOAD RATING 190 kN
PRECISION Standard
STATIC LOAD RATING [MAX] 41800 lbf
WEIGHT 20.735 LB
EAN OR UPC 97741018616
I have a quantity of two that are unused but have been on a shelf for some time.
Specifications
Manufacturer | MRC |
Model | 7417 DU |
Condition | New |